For your Battery Charger (Rectifier) needs you can contact us via fast mail.

Transformer Type Battery Charger ENERJİTEM, Switch Mode Battery Charger systems offers more than your expectations thanks to its advanced software and special charging program. It responds to all kinds of needs with its uncomplicated structure and user-friendly program. Marine group chargers can be operated safely with both the mains and the generator. It keeps the batteries charged whenever it is energized, and the lighting etc. connected to the system. It also feeds the receivers. In this way, it protects the batteries against charge-discharge cycles. The most important feature of the device is that it can be used both as a power source and as a battery charger. Also, thanks to its low ripple factor, the life of the battery is extended. It is an ideal solution with its small size and lightness, where device weight and dimensions are a problem. Starter batteries can be charged with marine group chargers. All Battery Charger (Rectifier) models are at ENERJITEM

 Battery Charger Rectifier Groups are used in places such as hydroelectric power plants, thermal power plants, energy distribution centers. Generally they are 110 Volts, but they can be manufactured between 24-240 Volts. DC distribution panel can be arranged with one or two rectifier inputs and as many receivers as desired, depending on the project. circuit breaker and fuse are used for each receiver. It can also be equipped with measuring instruments to measure the voltage and currents of the rectifier and the load separately. Thanks to the DC leakage protection system used in the system, full protection is provided against leakages that will have ground from the + or - busbar. In case of earth leakage fault, the system can be shut down optionally. Rectifiers can be manufactured in protection class between IP20-54. It has oven painted steel construction. Optionally, they can be produced as standing type or wall hung type in any size. When a compact structure is needed, rectifier, batteries, distribution system can be placed in the same cabinet.  All Battery Charger (Rectifier) models are at ENERJITEM

 Battery Charger Rectifier Groups are used in places such as hydroelectric power plants, thermal power plants, energy distribution centers. They can be manufactured between 48-240 Volts, although they are generally 110 Volts. DC distribution panel can be arranged with one or two rectifier inputs and as many receivers as desired, depending on the project. circuit breaker and fuse are used for each receiver. It can also be equipped with measuring instruments to measure the voltage and currents of the rectifier and the load separately. Thanks to the DC leakage protection system used in the system, full protection is provided against leakages that will have ground from the + or - busbar. In case of earth leakage fault, the system can be shut down optionally. Rectifiers can be manufactured in protection class between IP20-54. It has oven painted steel construction. Optionally, they can be produced as standing type or wall hung type in any size. When a compact structure is needed, rectifier, batteries, distribution system can be placed in the same cabinet. All Battery Charger (Rectifier) models are at ENERJITEM